| |
Aestero Panels for Automatic RO plant
|
| |
Available Models.
Aestero1 :- Suitable for small RO plants having only 1 no. High Pr. Pump
single phase upto 2 HP. |
| |
Available interlocks :-
Low Pr. switch
High Pr. switch
Permeate tank level switch.
Current overload protection.
Debounce Delay for Low Pr. Switch.
Auto Flushing.
Additionally,
Low level in dosing tank and tripping due to high conductivity can also be done in this Panel.
|
|
|
|
Aestero 3 :- Suitable for small RO plants having only 1 no. High Pr. Pump
single phase upto 5 HP
|
|
|
Available interlocks
Low Pr. switch
High Pr. switch
Permeate tank level switch.
Current overload protection.
Debounce Delay for Low Pr. Switch.
Auto Flushing.
Additionally,
Low level in dosing tank and tripping due to high conductivity can also be done in this Panel.
|
|
| Microprocessor Based Models : These panels are digitally programmable. |
| |
|
New LCD Panels with Conductivity / TDS Display.
|
| |
|
Aestero 11 |
Suitable for Raw Water Pump and High Pr. Pump both single phase upto 2 HP. |
Aestero 13 |
Suitable for Raw Water Pump single phase upto 2 HP or having inlet solenoid Valve and High Pr. Pump 3 phase upto 5 HP. |
Aestero 33 |
Suitable for Raw Water Pump and High Pr. Pump both 3 phase upto 5 HP. Aestero 33 can be given for HPP pump upto 7.5 HP at an additional cost. |
|
| |
Available interlocks |
| |
Low Pr. Switch
High Pr. Switch
Permeate tank level switch.
Raw water tank level.
Current overload protection.
Dry running protection.
Digital Amp. Meter, displays RWP and HPP current alternatively.
Debounce Delay for Low Pr. Switch is settable.
Auto flushing, during startup and stopping of plant as well as cyclic flushing.
Low Level in dosing tank
Tripping due to high conductivity
Models available for 3 Pumps. Also lik 333 / 331 / 131
One additional Chemical Cleaning Pump / Transfer pump ( single phase or 3 phase based on your requirement ) is added in this panel along with Digital Conductivity Meter Display.
Please do send us an e-mail to receive operation manual and detail programming of these Panels.
This Panels can be mounted inside aditional box with MCB also.
|
| |
Microprocessor ( PLC ) for custom build Panels. |
|
| |
For RO plants of larger capacity, we have standard microprocessor based 8 input / 8 output pre- programmed microprocessor. The timings and Auto Manual functions are site programmable.
Economically priced as compared to PLC. Programme is pre- checked by us before dispatching the same. Wiring drawing along with programming instructions are standard supply making it very easy for your Panel builder to make Fully Automatic RO plant Panel using this Microprocessor. |
